Lazy Cradle for the "Bento mini for Voron V0.2"

“Choose a lazy person to do a hard job. 
Because a lazy person will find an easy way to do it.”     

– Bill Gates

Saw this pretty good carbon filter but I don't want to disassemble the frame just to preload 2 M3 Nuts. So I've redesigned the cradle. It now has a bulge for the 3mm slot. You install the cradle at the top and bottom, so the bento mini can no longer fall out. In addition, you can install the two slot covers, the 27mm at the front and the 56.8mm at the back, then the bento is in the middle of the print bed.

I also designed the "LC-Top_with_cable_slot.3mf" in such a way that the cable from the fan can be "invisibly" routed into the profile. 

Remove the small piece of support

Put the cable in the small slot.

Til it comes out the other side.

If You don't need it, You can print “LC-Bottom” twice.

Info!

It's made with enough space and the brackets are little loose, so that you don't destroy your Printer.
If it fits too tight. Please print “LC-Bottom_more_tolerance.3mf”.