Waste Bucket For Bambu Lab Printers with Hanger (V2)

My waste bucket design aims to be more efficient than other models while retaining functionality, capacity, and aesthetics. It mounts cleanly and securely to the printer but is easy to remove. It protrudes roughly the same distance as the power cord, allowing the printer to be placed near a wall. 

Print time should be around 2 hours using only 70-80g of a filament of your choice.

11/17/23 Update: Uploaded V2 Version with thicker back wall and many subtle refinements

9/15/23 Update: Some users were trying to print on its back causing print failures. I updated the stl files to default to the correct orientation in the slicer.

STEP files included for modification as needed.

Installation Instructions:

1. Remove the lower waste chute screw.
2. Locate one of the short 8 mm screws included with the printer to secure parts during shipping.
3. Add the hanger bracket as shown and replace the lower waste chute screw.
4. (Optional) Add any strong magnet that will fit in the 15x2mm slot at the bottom to better secure the bucket and prevent rattles