Pumpkin Spice Doggo - Hueforge Art

Meet Pumpkin Spice Doggo, the playful halloween pup out playing in the pupkin patch.

Created using the fantastic Hueforge app, by Steve. To create your own Pumpkin Spice Doggo use the following instructions.

Print at 100% infill with a layer height of 0.05mm with a base layer of 0.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA+ Esun Bone White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #9 (0.6mm) swap to Earth Brown
At layer #16 (0.95mm) swap to Red
At layer #20 (1.15mm) swap to Lemon Yellow
At layer #27 (1.5mm) swap to Cotton White
At layer #31 (1.7mm) swap to Bone White for the rest.