Attach Point - Connect bungee/shockcord/paracord to backpack

After some extensive searching, it took a while to find a way to add “attach points” to my backpack to be able add some bungee cord without permanently modifying or damaging the bag. There were no printable models that did quite what I was looking for. I did find a product that was no longer for sale or available anywhere, so I decided to create my own inspired version. 

To install, put the “back” piece on the inside of the backpack (or whatever you're attaching to) and from the outside push the skinny part of the ring into the material to push the material and ring into the slot of the “back” piece. Once pushed in, using a bit of force, start turning the ring so the thicker part of the ring is behind held in by the “back” piece slot. I hope that makes sense. When you start putting it together, it should become more obvious. See pictures as well.

Printed in PETG at .10 mm layer height.