February 28, 2024
Description
A design i created in Fusion 360 based on a drawing i have seen online.
Thickness 20mm
Height: 163mm
Width: 94mm
Print Settings:
Layerheight: 0.3mm
Infill 10%
Top / bottom layers (default): 4
I would modify the postion of the seam to be around the feet somewhere.
White models show the infill when to much light is behind the model, for this i use 6 top/bottom layers but you can adjust this as required.
License:
Creative Commons — Attribution — Noncommercial
Bjorn V
