Garmin Edge / Wahoo mount for Rose Xlite bike with aero handlebar

v2: 

• Top surface is flat now so it can be easier to print upside down
• sturdier constrcution through softer radii 
• Original Garmin and Wahoo mounts can be used with screw holes, mounts will fit without protruding

Update: Wahoo compatible model uploaded. To be tested since I only changed the orientation of the Garmin mount by 90°. Feedback appreciated!

Since there is only one crappy overpriced Garmin Edge mount from Rose that fits their Xlite aero bar I designed my own. I use the Edge 830 and haven't tested it with bigger models yet. 

Weight with 20% infill: 16 g

Total weight with two M5 x 20 screws + washer: 25 g
 

Layer height: 0.20mm

Infill: 20 %

Wall loops: 4

I recommend printing it in the oriantation that I defined in the stl and use supports. This ensures a good quality fit of the mount.