OSRS party hat

I exported the party hat model using the Model Exporter Runelite plugin. I loaded it into Fusion 360, cleaned up the mesh, then gave it thickness.

I included 3 stls:

• partyhat-game-accurate.stl - This is the model just after cleaning and giving it thickness, the base is not flat so it would be rather difficult to print
• partyhat-adjusted.stl - I modified the above version to have a flat base to print from
• partyhat-adjusted-thicker.stl - Same as the above but twice as thick (6mm), if you are going to scale it down, I would recommend this one

At 100% scale, the "hat brim" is ~195mm front to back and ~173mm side to side. Keep in mind that several of the points are angled outward so that may impact print volume.

I would recommend increasing the parameter count until there is no infill and printing with a brim. I didn't print a head-sized version but the one in the picture is the thicker version at 25% scale. I printed it on a Prusa Mk4 in Prusa azure blue PLA using the 0.2mm layer height structural input shaper profile.