Kindle Basic 2 case

Originally published here: Kindle Paperwhite 3rd generation case by tato_713 - Thingiverse

To verify if this case is compatible with your e-reader, you need to check the serial number, the first six digits must be "G000 K9" or "G000 KA" (source). The other Kindle case I have designed is the Kindle 7. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Not tested. 
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The holes for the buttons are opened on the front side. Tested only on PLA.

Print Settings

Rafts:

No

Supports:

Yes

Notes:

If you set the wall width to one filament line (0.4mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.