Dell UltraSharp Monitor Mobile Phone Mount

** Update 2024-01-08 **

I've added a larger version of the model that can accommodate phones with a case. This has been tested with an iPhone 13 Pro + case and it works well. 

See file: dell-monitor-phone-mount-lrg.stl or dell-monitor-phone-mount-lrg.3mf

Introduction

Inspired by the aesthetics of a monitor phone mount I saw on thingiverse, I found it didn't fit my Dell UltraSharp monitor or my Pixel 2 mobile phone. 

Starting from a blank canvas, this mount follows the curves of Dell UltraSharp monitors. I have tested this with my U2715H and U2414H monitors and it works well with both of those. It may also work with other Dell UltraSharp monitors, but my testing has been limited to the two models above. 

My Google Pixel 2 phone (without a case) is used as the webcam. Other phones will work depending on the position of the front/rear cameras and whether you use a case or not.

An STL file is provided of a single mount (two are required). The 3MF file includes two mounts.

Print settings

• Material = PLA
• Layer height = 0.2mm
• No supports required
• 15% infill