September 6, 2023
Description
Simple Nintendo© magnet
-Holes for 2 8x3mm magnets, press fit into model
-30min print time
-Color change if desired
Color Change Instructions
Change color on:
layer 15 if printing with 0.24mm layers
layer 19 if printing with 0.2mm layers
layer 23 if printing with 0.16mm layers
*You may want to scale up model by 0.25% increments if magnets do not fit
Nintendo© and the Nintendo Logo are trademarks of Nintendo© which does not sponsor, authorize, or endorse this model.
Happy printing!
License:
Creative Commons — Attribution — Noncommercial
7
Calin
