Bnei Brak Biluna Roller Coaster

This is a project I did for the Municipality of Bnei Brak. They had an Amusement park this summer and wanted a 3d printed version for their donors.

I printed the base on its side no supports needed. The pillars with supports laying down with arms up except for the one with the arms on both sides in its normal position. the slides should be printed standing up with supports. A brim can help prevent them from falling over. The Roller coaster car was printed with a 0.2mm nozzle with supports from the bed only.

Print Settings

Printer:

Trilab DeltiQ

Rafts:

Supports:

Yes

Resolution:

Infill:

15%

Filament:

Fillamentum Pla Extrafill

Mukha, Sky Blue, Traffic Red, Rapunzel Silver

Category: Buildings & Structures