September 6, 2023
Description
Spool holder diameter was reduced and flattened on the sides so it can be printed on its side.
The design holds onto the ball bearings so the roller can't slip out with no effort.
The Bolt/Mount & Nut are stock from the original Filler (thing:3020026) and the roller is a supportless remix (thing:3055046)
Update: Shaved 0.5mm off the bottom of the Spool Holder so it sits properly flat (v2.2)
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
20
Filament:
PolyMaker PLA
Notes:
3 layers
License:
Creative Commons — Attribution — Noncommercial
7
TheViralDIY
