Baseball Doggo - Hueforge Art

Batter up! Meet baseball Doggo, an all-star baseball playing doggo getting ready for the pawst season

Created using the fantastic Hueforge app, by Steve. To create your own Baseball Doggo use the following instructions.
 

Print at 100% infill with a layer height of 0.05mm with a base layer of 0.2mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyTerra Pastel Candy Transmission Distance: 2.5
PLA PolyLite Natural Transmission Distance: 21
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.5mm) swap to Earth Brown
At layer #8 (0.55mm) swap to Azure Blue
At layer #10 (0.65mm) swap to Earth Brown
At layer #14 (0.85mm) swap to Pastel Candy
At layer #15 (0.9mm) swap to Natural
At layer #17 (1mm) swap to Pastel Ice
At layer #18 (1.05mm) swap to Cotton White for the rest.