Separator and label holder for Lidl drawer locker

Last week, there was those drawer locker during the Lidl DIY week at Lidl. I bought 2 of the one with 32 little drawers and 1 with the biggest drawers at our local shop.

Link to order on website as well : https://www.lidl.fr/p/parkside-casier-a-tiroirs/p100365198

That's a really good deal, 9.99 €, unbeatable from everything i have seen elsewhere. In case of you would get it, you can order it on there website with very very low shipping fees.

Unfortunatly, i had one separator broken for the little drawer, and also there was not enough of it to use 2 by drawer, and also appeared there was no seperator for biggest drawer.

I decided to modelize it and to print it.

Also noticed there was a slot to put a label holder, so i also designed those.

What to print :

• The one on left on the picture above → Little drawer separator.stl, Big drawer separator.stl, Little drawer label.stl, Big drawer label.stl
• The one on rift on the picture above → Little drawer separator.stl, Little drawer label.stl

I used ABS, but can print with any material. Files are supposed to be at the corect orientation to be printed when imported into the slicer.

Enjoy !