Geralt and Yennefer (The Witcher) - Hueforge Print

Never Lost, Always Found.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Overture Black Matte Transmission Distance: 3
• PLA+ Sunlu Grey Transmission Distance: 2
• PLA META Sunlu Red Transmission Distance: 4
• PLA Overture Cream Transmission Distance: 3
• PLA Sunlu Beige Transmission Distance: 8
• PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:

• Start with Black Matte
• At layer #12 (1.04mm) swap to Grey
• At layer #16 (1.36mm) swap to Red
• At layer #17 (1.44mm) swap to Cream
• At layer #18 (1.52mm) swap to Beige
• At layer #24 (2mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.

*If you are using a single AMS, you can do more than 4 colour changes by swapping out a spool that has been completed printing with another, for as many times as you want.