RadioLink R4FGM Receiver Case

This is a case you can use to put the RadioLink R4FGM receiver into. It just requires that you cut them free from the heatshrink which they come with.

Puting them in a case makes it easier to handle in RC cars which are designed around receivers in solid cases.

Once you cut the receiver free from the heatshrink if you are carefull you can remove the top sticker and apply it to the lid of the case to give a more professional look and so you know which channel is which.

Because these receivers have a gyro in them you should apply a small piece of double sided tape to the bottom of the receiver PCB which will hold it place to the bottom of the case which does 2 things, keeps it from rattling around and also allows the gyro to work more efficiently.

You can then put the lid on the case and either just let the friction fit of the lid hold it in place or glue or tape it down.

I printed them at 0.1mm layer height with PLA and a 0.4mm nozzle. You can print them at higher layer heights but at 0.1 it keeps the accuracy of the lockin tabs on the lid and it only tages around 27minutes on default settings.

This might VOID any warranty you have so do it at your own risk.