Succulent or Small Plant Trellis

There are two variations of them, wide (79mm by 130mm) and not wide (50mm by 130mm). In the images I uploaded you can see three variations of them. One wide set to 125% in red. One not wide set to 100% and another set to 150%.

Printed at  .16 layer height

15% infill

The infill doesn't matter too much because the only portion that really requires it is the base that gets stabbed into the dirt. With 3 walls the remainder of the trellis will be 100% infill since the walls are thin.

You will want to add supports around the inner top lip to prevent stringing.

The .step files are there if you need to make any modifications. The 79x130mm and parts file has a left side, a right side and a middle section if you would like to create your own custom wide trellis. The left and right sides together are the same as a 50x130mm.