April 29, 2023
Description
Case made to hold the typical 48 SMD LED panels you find all over Amazon & Ebay that have all of the funky car dome light connectors. I would probably recommend when wiring the panel to possibly utilize a resistor to knock down the brightness & the temperature. A potentiometer even.
UPDATE: As for utilizing a resistor, sweet spot seems to be between 30Ω & 40Ω. The LED doesn't get hot at all, slightly warm to the touch after 15 minutes of use. 40Ω and higher, the LED stays cool & still puts off decent light if you keep the LED closer to the bed.
Printer:
Prusa i3 MK2
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
.2
20%
Notes:
If your printer can do 60mm bridges, then you probably do not need to use supports.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
nixternal
