September 10, 2023
Description
Needed a ballpoint mount for my ram mount GPS holder for m6 bolt and a specific height (to get over my dashboard)
The height of the sleeve (until the ballpoint) is 20 mm and the bolt head is another 5 mm up in the ball point.
I made an infill to put in the hole after the bolt, I do this for additional structural strength
I remade it to put a fishing line true it, I just had it solid and drilled a little hole in it to take it out with a loose screw I screw in it
I recommend using ABS or PETG for strength and heat resistance in direct sun.
Likewise, I also recommend using a maximum of 0.15 mm layer height for structural strength.
License:
Creative Commons — Attribution — Noncommercial
7
DenBéire-BD
