September 11, 2023
Description
Just a simple extender for a food dehydrator to allow 2 rolls of filament to be dried at once. Just print 3 of the same part and they sit next to each other to form a complete ring.
Outer diameter for the bottom is 320mm
Outer diameter at the top is 315mm
Overall height is 147mm
Printed in ABS on a Bambu Lab X1C, 0.2mm layer height, standard profile except using gyroid infill at 10% no supports needed.
License:
Creative Commons — Attribution — Noncommercial
7
Kitbuilt
