Protective cap for clamp

These clamp caps always get lost and really can't by any replacements. So printing them is perfect. The Wisent clamp I've designed it for is just a standard screw clamp (size 200x50mm). The clamp end is 19mm in diameter, so this cap would fit any other screw clamp with the same size.

For a result closest to the original part, a flex filament would do well, but the print works just fine with a simple PLA/PETG filament. Due to the inner diameter narrowing at the top (to make it stay on) you may need to use the clamp to pop it on. Once there, it's not going anywhere.

I've attached the OpenSCAD file, so dimensions can easily be modified for clamps of other sizes.