Replacement Microphone base

So about 3 years ago I set my microphone stand down too hard and the base snapped. Fast forward 3 years and I decided to finally recreate the piece. This stand base was printed at 20% infill at 0.2 mm layer height and took about 30 minutes. 

If you want to buy the microphone for yourself, here is the link:

https://www.amazon.com/gp/product/B08B1FQGZW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1#
 (It's actually a pretty good mic and I don't get a commission from this, it's just a good mic)

If by chance you have this base and lost the screw, M3x10 screws work pretty well