Speaker Magnetic Connector Plug / Coupler

I've created a magnetic connector and coupler to simplify speaker wiring.

Printing: 

• The plug is designed in two parts (split in PrusaSlicer) 
  • Easy2Print, 0,2mm PETG without supports
• Coupler
  • Easy2Print 0,2mm PETG with supports from base plate only

Assembling/Materials: 

• Plug: 
  • 1x M2x6 Screw 
  • 1x M3 Hex Nut
  • 2x Magnetic Pogo Pin Connector (10mm diameter)
    (one pin and one target for protection against polarity reversal)
• Coupler
  • 2x Magnetic Pogo Pin Connector (10mm diameter)
    (one pin and one target for protection against polarity reversal)
  • Make sure to glue the magnetic connector at the specific position.

Used magnetic connectors: https://de.aliexpress.com/item/1005003642741412.html?spm=a2g0o.order_list.order_list_main.5.26575c5ffLtiSg&gatewayAdapt=glo2deu