R2-D2 Center Foot Support Upgrade (for Mr. Baddeley's Version 2)

This is an upgrade to the center foot support for Mr. Baddeley's Version 2 R2-D2. I found the original support to be a little too flexible. I modeled this after the Mark III design. However, I added even more cross bar support to make it even stiffer than the Mark III. This upgrade will require longer bolts.

I printed with PETG six perimeters, 35% infill, and .2 layer height.

4 M4 70mm bolts - To bolt the foot to the base plate.

8 M6 60mm bolts - To bolt the base plate to the body and skirt.

1 M4 40mm bolt with a flat head (it gets inserted between the top of the foot and the bottom of the support.)

Category: Robotics