September 25, 2023
Description
First off I would like to thank Whity and JensCraft3D for two great designs. The combination of their two designs creates this model and has proven to be reliable in the hands of children and travel.
Everything with this case can be printed without supports and prints very well with a 0.4mm nozzle at 0.2mm layer height.
Requires the 6 M3 x 30mm long socket head cap screws for assembling the top, bottom and clamps together.
For the installation of the card claws, there is a good guide on how to install them here.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
6
S2 Engineering
