November 10, 2024
Description
Update Nov. 2024: I completely redesigned this in Fusion 360 and tuned the tolerance for my printer. I suggest printing all the parts on the same printer to ensure a proper fit. There is a .2mm tolerance between the studs. Check your printers tolerance otherwise this fit will be too loose or too tight. I also redesigned the 'Stud' and added a ‘Stud with Logo’ with a really close font to actual LEGO.
No supports needed!!
Print at 200% to achieve the size in photos.
STEP files attached so you can change the design if needed.
License:
Creative Commons — Attribution — Noncommercial
7
Fuganater
