September 16, 2023
Description
Open case for 5110 LCD and ESP 8266 mini. The holes are 2.5 mm diameter, I used some screws for plastic that I already have. The ESP board I have has 2 holes at each side. There are several models with different size. I attached the FreeCAD models if you need to adjust it.
The data shown is from Home Assistant via esphome. At first, I tried to add a button, but finally the information changed with a timer of 5 seconds. It’s possible to automate the page to show depending on if a sensor has data, too.
The duppont connector to the display is from @NERDCORNER_654082 :
https://www.printables.com/es/model/518876-connectors-edition-3-8-pin-dupont-jumper-cable
License:
Creative Commons — Attribution — Noncommercial — Share Alike
xavitron
