Ikea Nordli Remote Bin

This is a remote holder for Ikea's Nordli headboard. Nordli already has some nightstands and bins that can mount between the planks in the headboard, so I wanted to pattern something after those bins that would fit my remotes.

These remotes may or may not fit your exact remotes, which is why I included the STEP file so that you can customize it to fit whatever size and/or quantity of remotes you have.

The holes in the default STL were designed specifically to fit a Hisense U8H remote, an Apple TV Siri Remote (with this Spigen Airtag Silicone case attached), and a TCL Alto 6 soundbar remote.

Keep in mind that if you modify the STEP file to fit your own remotes, the bottom of each compartment will need to be adjusted per remote so that you can get an even angle when the remotes are sitting in the bin. The bottom of each compartment may or may not be the same, depending on the length of the particular remote your are modifying the compartment for. I targeted a 25mm step down from the top of each remote to the next so that the angle of the remote tops creates a line that is roughly equivalent to the slope of the top of the bin itself.