Quad Wago + JST mount for ZeroG Hydra

While getting ready to update the arms on my ZeroG hydra I saw the new Wago mount but it only had room for up to three wagos and nothing for a JST passthrough for the thermistor but I liked it more than the way I had done it on the old arms so I modeled the mount for the Fabreeko 2x2 JST splitter and optionally a fourth Wago without the need for wider mounts on the hydra arms. This way the bed can be made easier to take on and off and wagos can be used for the thermal fuse as well as ground, the JST splitter can be used for the thermistor. 

All of this allows the bed to be removed without needing to fish out any of the wires or in the event of a blown thermal fuse its a quick job to swap it out.  If you dont want the fourth wago there is also a file that adds just the JST splitter

It is not needed but it is how I already had mine wired from before, albeit with a less tidy solution for the mount before.

BOM to attach the JST splitter are two of each of the standard M3x5x4 heatset inserts used in Vorons and the rest of the ZeroG parts and M3x6 screws Button or Socket will both work so choose the one that you have or think looks best.

This is intended to be printed in ABS/ASA and per the printing guidelines outlined for the rest of the ZeroG printed parts