September 26, 2023
Description
Basically prints without support and brim, but I'd recommend a 5mm brim and organic support for the locking interface (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or similar instead of PLA for a longer lasting model.
Fits models v1 to v6.
A nozzle for the v7 (and later) models can be found here:
https://www.printables.com/model/594900-dyson-flat-nozzle-100x4mm-v7-and-later
License:
Creative Commons — Attribution — Noncommercial
thomers
