Mini Scraper Holder

I created this Mini Scraper Holder to safely store a mini scraper when it's not being used - while also allowing easy access.  There is also a pocket for storing a spare single-edge razor blade.  It is intended to be screwed onto a wall.

CAUTION! Be sure to attach this Mini Scraper Holder where children (or others who shouldn't have access to razor blades) can't access it!

Please see the attached photos for examples of mini scrapers supported by this design - which are sold under many brand names and available at most hardware stores.

The provided STL file is intended to be printed in PLA (though PETG, ASA, or ABS should also work fine) and does not require supports.

A PrusaSlicer 3MF file is provided for generic PLA, and a G-code file is provided for the Original Prusa MK4.

A STEP file is also included for those wishing to remix the design.

The Mini Scraper Holder seen in the photos was printed on an Original Prusa MK4 in FilaCube Red PLA with a 0.4mm nozzle at 0.3mm layer height with a 5% gyroid infill. You can increase the infill - perhaps to 15% - if you want a smoother appearance.  I'm ok with 5%, since I have mine in the basement and in the garage.

Be sure to check out my other designs - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models