Espresso tamper station (51-54 mm / 58 mm)

Please report a portafilter or other equipment that is not fitting, plus its dimensions. 

The tamper station features:

• holding the portafilter for preparing the puck (adjustable via vertical screw)
• storing two bigger 51-54 mm or 58 mm tools lik a tamper and and a leveler
• holds up to four puck screens or paper filters
• two smaller, deep holes in the back for storing a brush or the WDT tool
• big horizontal hole in the side for storing a portafilter funnel or else
• four notches on the bottom to add anti slipping feet’s (rubber or leather)

Print the model with support if your printer cannot bridge the big side hole. Use as many infill as heave you want the tamper station to be. You will need a M3 threaded insert and a M3 machine bolt for the adjustable nob to be working. 

Attention: The 51-54 mm version was not tested yet. I scaled down the dimensions according to drawings I found on the internet. Dimension vary from machine to machine, please report a portafilter that is not working plus its dimensions.