September 21, 2023
Description
Bike charger holder - Bosch E-bike charger
Design by R_vdk
Application / Functions
For my wife's new E-bike, we were looking for a way to cleanly store her charger in the garage. What better way than to simply create something ourselves. It is easy to print, easy to use and install.
Charger: https://www.bosch-ebike.com/en/products/charger
The charger slides is easy to install. Both two-sided duct-tape or 2 / 3 screws can be used to wall-mount the holder. As the holes are chamfered, no screw get's in the way of the charger. The charger slides in & out easily without needing to remove the bottom cable.
Mounting the holder using 2 or 3 wallscrews
Easy to take in & out
Yes, I know there are other, similar versions out there; Yet, this one fills our needs best. Feel free to remix or adapt. As you can see in the pictures, I added a previously printed hook to the holder which I had laying around.
Printer settings – Prusa Mini+
| Setting | Value |
| Filament | PETG |
| Nozzle | 0.4mm |
| Layer thickness | 0.2mm |
| Temperature | First layer +10°C, rest at standard values |
| Sheet | Textured sheet |
| Speed settings | Factory settings |
| Infill | 20% |
| Brim | No |
| Supports | Organic supports for the inside overhang |
License:
Creative Commons — Attribution
8
Rvdk
