E3D V6 Gardena System Watering Nozzle

For all you 3D printing nerds…

This is a 5mm nozzle for your Gardena watering system. If the interrest is big enough i will create different diameters, if you want your water to leave the nozzle with a higher line width. But your water extrusion system (water hose / pump) must be able to handle this. And for very fast watering i will make a Volcano style nozzle with a longer melting zone for the water to melt faster.

Print this with the nozzle tip on the printbed and the Gardena coupling on top.

You have to source a rubber o-ring with 16mm outer diameter and 2.5mm ring width yourself for sealing with the Gardena coupler.