Happy Helper Chip Bag Clip (Reusable)

PLA has a bad habit of not retaining its shape when bent to many times and this design aims to defeat that. The Happy Helper has a top support that is compliant and can move to lock the clip in place if it gets to deformed to hold your items. This also prints in under 30 minutes! Minimal filament very strong and reusable. 

All files have been oriented to load into your slicer in their optimal printing orientation. I've also included options for a bundle of 6 and 8 so if you want to print more than one you don't have to mess around with getting them all to fit nicely. 

Cura Settings 

Quality: *you can increase or decrease layer height, would not recommend increasing line width.*

Walls: 

Top/Bottom:

Infill:

How it should look sliced:

The only real requirements is that you have high infill to make it sturdy and reusable. The lower infill you use the quicker this will degrade. 

Tested in both PLA and PETG. For the strongest results, print in PETG. 

Calibration Tips:

If you need to Calibrate your Printer, My Go-To Calibration Cube is one designed by me that tests multiple areas in a fast quick print. 

https://www.printables.com/model/650696-deathly-hallows-calibration-cube

Happy printing this Happy Helper! 

***update 9/20/23 added STL file option and batches of 6 and 10***