September 20, 2023
Description
Print all the gcode files or more explicitly:
2 x nut.stl
1 x arm.stl
1 x base.stl
1 x mount.stl
arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed
The Tapo is coming with its own "foot-type" mount. To use it with this printed mount, the foot needs to be removed.
Bend the leg so the ball snapped into the foot is going out if the housing.
Pull the small rubber thing from the bottom of the ball.
Find the small screw in the ball / leg and unscrew it.
Plug the remaining "short leg" into the printed mount.
Add the screw you removed in step #3 to fix the short leg in the printed mount.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
rursache
