TPU TinyWhoop Camera Mounts (multiple cameras, 15-55°)

Camera Mount for Tinywhoop Racing 15 - 55 degree tilt

McStinkyHDZ is for the HDzero Nano Lite, there are also spacer files to raise the mounting point above the vtx board.

TheMcStinky is for cameras with a 10mm lens and 12mm body, like the Foxeer Pico Razor or Tinywhoop.com Pinch (fits tight on the lens of the Pinch but loose around board)

BigMcStinky is for larger cameras with a 10mm lens and 14mm body like the FPVcycle Caddx Ant Lite or Newbeedrone Beeeye

NanoMcStinky is for the Runcam Nano3 which has a smaller 7mm lens that is not as long

These are minimal lightweight canopies and may not provide the camera protection of some larger heavier canopies. They are very durable printed in TPU and withstand crashing well. The cameras fit snug but a small spot of E6000 or Welder can stop the cameras from shifting in the canopy during a hard crash. Placing a thin piece of foam between the canopy and FC will also add some protection.

Average about 0.7 grams (can be printed lighter depending on filament and settings)

Enjoy
-Kbar

original created in Sept 2022