Simple Hook Extension for Fuxtec Folding Handcart

This is a remix of my own design. It extends the original hook of a Fuxtec folding handcart, which can be used to hang a bag on it.

You can find explanations and uses for the 'side' and 'back' hooks on the link below. From there, you can also start creating your own hook using the provided 'template'.

Print Settings:

• Layer Height: 0.24
• Wall Loops: 5 (get massiv part)
• Consider using an outer brim for better bed adhesion
• Recommended materials: ABS, ASA, or PETG (PLA is likely to break)

Visit this link for the original (template) model page: https://www.printables.com/model/589474-fuxtec-folding-handcart-hooks-template

Visit this link for the Onshape document: https://cad.onshape.com/documents/d5ff1324370149c55a9b1130/v/97e9ea5b90b47d92db64ee8a/e/dd999c37abc364b20fc4cf1a?configuration=Hook_Inner_Diameter%3D0.01725%2Bmeter%3BList_bqYtvOsOcxaDXr%3DSides&renderMode=0&uiState=650d620f615ee301c64e9870

Update 14.10.2023:

• After a few field tests, I realized that the hook, which holds things like a backpack, should be placed a bit higher. So, I added an "extra-long" version.

This English text has been corrected by AI (OpenAI/ChatGPT).