Galaxy Walk - **Hueforge Print**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
**Filaments Used:**
- PLA Siddament Black Transmission Distance: 0.2
- PLA MAX CC3D Grass Green Transmission Distance: 2.6
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA META Sunlu Red Transmission Distance: 4
- PLA+ Sunlu Coffee Transmission Distance: 3
- PLA Overture Cream Transmission Distance: 8.4
- PLA META Sunlu White Transmission Distance: 9.6
Swap Instructions:
- Start with Black
- At layer #7 (0.44mm) swap to Grass Green
- At layer #14 (0.72mm) swap to Teal
- At layer #22 (1.04mm) swap to Red
- At layer #30 (1.36mm) swap to Coffee
- At layer #35 (1.56mm) swap to Cream
- At layer #40 (1.76mm) swap to White for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
cyanidesugar
