Light Duty Box Wrench

A box wrench I printed in PLA on both my Artillery Genius Pro printer using Polymaker filament (the grey sample) and on my Lotmaxx Shark printer using Hatchbox filament (the blue sample) at 0.16 and 0.15 resolution respectively. Not meant for heavy duty work at 20% infill. I found it interesting that dimensionally the Shark printed article is close to model size on the hexagonal cut, the other being at least 0.1 and perhaps even 0.2 mm oversize. Great fun in any event. All of us could easily envision a whole host of other sizes and paired combinations on the wrench such as 9 and 11, 8 & 10 etc. for which I would be happy to model upon request. I also considered having a box and ‘open’ ends but feel the ‘open’ config would be  far to0 weak for any practical use.