Apple Charger

Heavy Low profile charger for Apple Watch and iPhone. 

Items needed: Belkin 7.5w magnetic portable wireless charger pad (amazon) Apple watch charging puck, 6 M2 threaded inserts, 5 M2 hex screws, small fishing weights or some kind of heavy shot to add weight. 

**This model is weighted with a “weight tank” and can be configured for any Apple watch. 

First, melt in the threaded inserts see photos. Run cables through openings and run out back.  Next, snap in the Belkin charging puck then install Belkin retainer ring. Snap in the watch charging puck (this will take a bit of force) The quality of the print will affect the fitment of the charging pucks so some post work may be needed where the supports were. Select which watch tray you want to use and install the threaded insert and screw together. One of the watch trays will have “Ultra” printed on it indicating use for the Apple Watch Ultra. 

You can fill the weight tank with fishing weights or any heavy shot. The weight tank lids press fit onto the tank and come off easily until they are inserted into the main body, where they will remain in place after the bottom plate is screwed on. Just make sure the weight tank lids seat fully. Don't flip this upside down without gripping the base to the body so the heavy contents don't fall out. Screw the remaining M2 x 4mm hex screws to the base and your ready to use.