September 23, 2023
Description
The SS80 has a slightly different grip profile than the standard G43 so I remixed a version of the plug that I found on Thingiverse. The fit is a little tight to keep it from working its way out but there is a hole that you can put a wood screw in and pull out with pliars should you ever need to take it out.
I don't have a PF9SS so it may or may not have the same profile.
I printed in PLA+ with 100% infill. I don't EDC this one as it started as an 80% but if you choose to you might want to consider a tougher material.
License:
Creative Commons — Attribution — Noncommercial
11
GotIssuez
