FLSUN Q5 LED Light

The holder is for a 100mm long 24V LED strip with a switch. The rocker switch has 8.2x14.7 mm on the mount. I branched off the 24V at the main board fan. The cables are routed upwards in the V-profile and held in place with V-slot strips. The holder must not be attached more than 15 mm above the profile mount.

Are needed:
1x LED strip 24V 100mm
2x cylinder head screw M4x10
2x hammer nut M4
1x rocker switch
2x jumper cables with socket
1x pin header 2x

V-Slot Cover Snap-On for Ender 3 V2
https://www.thingiverse.com/thing:4866310