Ubiquiti U6 Pro WiFi Access Point Pole Mount Bracket

Ubiquiti U6 Pro access points are excellent for conferences, classrooms, etc. but if you need to set one up temporarily and/or you need it to be portable, mounting it to a pole is not easy because the access point is designed for wall or ceiling mounting.

This bracket lets you mount the Ubiquiti U6 Pro access point to a pole using a hose clamp.

Parts Required for Assembly

• U6 Pro access point
• U6 Pro metal ceiling mount bracket (included with U6 Pro)
• U6 Pro ceiling mount screws and nuts (included with U6 Pro)
• 3D Printed bracket (this part) sized for your pole (2 files provided, one for 1.5" / 38mm pole, one for 1.75" / 44mm pole)
• Hose clamp, 2 inch (51 mm)

Print Settings

• Print Material: PETG or Tough PLA
• Layer Height: 0.2mm
• Perimeters: 3
• Solid Horizontal Layers Top/Bottom: 4
• Infill: 20%
• No Supports Required

Assembly

Refer to pictures.  The holes in the bracket should line up with the group “A” holes in the U6 metal mount bracket.

License

This model is licensed under the Creative Commons Attribution-Share Alike license.  You can remix, share, and make derivative works, but they must also be published under this same license and must link to this original model.