Gardena System Watering Hyperjet (High Flow, Far Throw)

I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden.

So i tried many different designs by myself and after hours of testing this simplified far throwing high flow jet was born. With this jet the resistance is reduced to a minimum, the cross section is maxed out and the throw distance of the water is in my case around 10 meters maintaining a maximum throughput.

Print it with the jet tip on the build plate - the gardena coupling upwards. Very simple to print with any filament types. No support needed.

A pure high flow jet for Gardena System can be found in my other models.

You need a rubber o-ring for sealing (16mm outer diameter, 2.5mm ring thickness).

Have fun and post a make if it helped you save your time for watering! How far does your printed model throw? Should we start a throw distance challenge ?