September 24, 2023
Description
The Famous "The Doors" Logo
Mixed Media, 3D printing and Acrylic Lasercut
Long edge size 20mm
Needed:
Super Glue for Fill inserts
10 screws 3mm (any length from 8mm to 20mm)
Threaded inserts (optional)
Single block design: The Doors Band Logo One Block
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
20%, 5 walls
Filament:
esun PLA/PETGFire Engine Red PLA
Notes:
Print Material Weight:
±70g Main Lettering
±12g black fill inserts
The main part print has slots for 3mm screw (length 12to16 mm preferred), Threaded inserts are optional
you can use the "02_Countersunk_base_3mm_screws.stl"in case you don't want lasercut the acrylic base
few drops of any good glue are enough to hold "03_Optional_fill.stl" inserts
License:
Creative Commons — Attribution
8
LexFran
