Lunar surface plates for Qube 500 case

Lunar surface plates for Cooler Master Qube 500 PC case.

I think it would look good on top of a computer case.

Two designs available: big and medium plate.

If you have a small printer, print a big plate piece by piece.

Dimensions:

-Big landscape: 184.1mm x 331.91mm x 20.11mm (Width x Length x Height)

-Big landscape half 1: 184.1mm x 165.15mm x 20.11mm (Width x Length x Height)

-Big landscape half 2: 184.1mm x 166.89mm x 19.73mm (Width x Length x Height)

-Medium landscape: 186.26mm x 167.09mm x 19.63mm (Width x Length x Height)

Printing:

-Connector: leave it in default position and print without supports.

-Other files: leave them in default position, add supports(bottom has cutouts for the connector to make it easy to assemble the model, you need supports for these cutouts) and print.

Building:

Attach the connectors in the indicated places (see photo below), apply some glue on top of the connectors(preferably so that it does not harden in a few seconds) and place the plate on the connectors. Then wait for the glue to dry.

-Big plate

-Big plate halfs

-Medium plate: similar to half.

Сonnector is licensed as public domain. Other files are licensed as Creative Commons - Attribuion.