Stormtroopers (Galaxy's Edge) - Hueforge Print

Stormtroopers as photographed at Galaxy's Edge, Disneyland CA.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:

• PLA Siddament Black Transmission Distance: 0.2
• PLA+ Overture Dark Blue Transmission Distance: 1.8
• PLA Overture Light Grey Transmission Distance: 1.6
• PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:

• Start with Black
• At layer #12 (0.6mm) swap to Dark Blue
• At layer #15 (0.72mm) swap to Light Grey
• At layer #19 (0.88mm) swap to White for the rest.