Ender 3 camera mount for Logitech Quickcam Pro 9000 (Modified for Creality auto leveler)

I really liked "Ender 3 camera mount for Logitech Quickcam Pro 9000" by Adeema but the printer would jam as it could not touch the x-axis sensor (due to the clip on the right towards the extruder). This will only happen if you have a creality auto leveler ( I have a CR touch). Hence I used Tinkercad to remix the model to remove the second clip (towards the extruder). You will need a double-sided 3M command tape to stick this model to the printer (since the second clip is no longer there). I used the "Command Picture Hanging Strips" that can be stuck to the wall and cut it to be just a little longer than the attachment (see pic) so that I can remove this in the future by pulling on the extra tape.

Built using supports. It still requires one M3x15 screw to clamp the mount securely to the Ender, one 3M Command double-sided tape, as well as the 4 screws from the webcam stock mount.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Infill:

25%

Filament:

Creality PLA

any

Category: 3D Printer Accessories