July 14, 2025
Description
Print Settings:
Printer:
Prusa i3 MK3S+
Filament:
PETG
Layer Hight:
0.3 Draft
Infill:
NA
Exterior Perimeters:
12
Brim:
No
Heated Bed:
Recommended
Supports:
No
Approximated Filament Usage:
2.58m
Approximated Print Time:
24 minutes.
If the peg comes off too long for proper fitment, you can reduce the overall length of the peg in your slicer of choice by as much as 1mm without compromising the integrity of the tab.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
PealPrint
